Base Map Pack 1 is a collection of 35 maps, broken down into six categories (Grass; Forest Floors; Scrublands;
Swamps & Thickets; Earth, Sand & Mud; and Cavern). The common theme for this
artpack is that all the maps are of natural environments (perhaps a future artpack will
cover man-made environments).
Like the grass map that comes with BRPG, the maps contained in this artpack all use
the same texture throughout. The idea is that you will customize these generic maps
with object overlays as needed to suit your Encounters (e.g., by adding trees, boulders, roads, paths, ponds, etc), rather
than use them as ready-to-go maps (although some of these maps can certainly be
used as-is).
Click on the thumbnail image to see a preview of every map in the artpack. Although the samples are a bit small, I hope
they still serve to convey the quality and level of detail. The maps are actually much more impressive when seen in their
entirety.
Only the GM needs to have this map pack installed; players do not need to purchase or install this artpack at all. Note
that BRPG v1.3d or higher is needed to use artpacks (and because BRPG v1.3d is still in beta, some of you may wish to
hold off on purchasing this artpack until v1.3d is out of beta).
I am selling this map pack for $12 (that's about 34 cents a map), as a means of subsidizing BRPG development. Think of
it as a Donate button, but you get some great maps in return.
I should also mention that a lot of these maps were created from images that are freely available on the Dundjinni User
Forums (the textures have been OK'ed for use in a commercial product). The graphically-inclined could probably
recreate many of these maps without having to purchase them, if they have the time and are so inclined.
I've made an effort to credit the original artists in a ReadMe that accompanies the artpack. They deserve the recognition,
and I couldn't have made these maps without their hard work.
Disclaimers:
Swamps & Thickets; Earth, Sand & Mud; and Cavern). The common theme for this
artpack is that all the maps are of natural environments (perhaps a future artpack will
cover man-made environments).
Like the grass map that comes with BRPG, the maps contained in this artpack all use
the same texture throughout. The idea is that you will customize these generic maps
with object overlays as needed to suit your Encounters (e.g., by adding trees, boulders, roads, paths, ponds, etc), rather
than use them as ready-to-go maps (although some of these maps can certainly be
used as-is).
Click on the thumbnail image to see a preview of every map in the artpack. Although the samples are a bit small, I hope
they still serve to convey the quality and level of detail. The maps are actually much more impressive when seen in their
entirety.
Only the GM needs to have this map pack installed; players do not need to purchase or install this artpack at all. Note
that BRPG v1.3d or higher is needed to use artpacks (and because BRPG v1.3d is still in beta, some of you may wish to
hold off on purchasing this artpack until v1.3d is out of beta).
I am selling this map pack for $12 (that's about 34 cents a map), as a means of subsidizing BRPG development. Think of
it as a Donate button, but you get some great maps in return.
I should also mention that a lot of these maps were created from images that are freely available on the Dundjinni User
Forums (the textures have been OK'ed for use in a commercial product). The graphically-inclined could probably
recreate many of these maps without having to purchase them, if they have the time and are so inclined.
I've made an effort to credit the original artists in a ReadMe that accompanies the artpack. They deserve the recognition,
and I couldn't have made these maps without their hard work.
Disclaimers:
- Some of the maps in this artpack are simply re-colored versions of other maps.
- Some of the maps are so detailed that even though they look super at full zoom, they don't look very good when
zoomed out. - Not all the maps work well at a setting of 40 x 40 grid cells. Some work best at 20 x 20, others somewhere in
between. - Because the artpack format is brand new, there may be undiscovered bugs that need addressing. Some users
may prefer to hold off on purchasing this artpack until all possible kinks have been worked out. - The content in this artpack may be improved over time (for example, some of the smaller maps may be reworked to
support 40 x 40 grid cells). Purchasing an artpack entitles you to all updates free of charge.
Commercial Artpacks for Battlegrounds RPG
Ravenlands Map Pack 1 is a collection of 4 maps and 4 Fog of War Overlays. Produced by Scrying Eye Games, this
artpack contains Maps 1 through 4 of their Ravenlands series of exquisitely detailed and interconnected maps.
• Map 1: The Castle Raven
• Map 2: Battleground of Old
• Map 3: River and Bridge
• Map 4: River and Caves
A 32 x 20 cell Overview Map (at a scale of 15 feet
per cell) is also included, which shows how the first
8 maps in the Ravenlands series interconnect.
The picture below shows how the Fog of War
Overlays can be used to mask things like the
interiors of buildings or caves until the adventuring
party enters and explores the area.
All the maps and Fog of War Overlays in this
artpack are designed to be displayed in BRPG at a
setting of 24 x 30 cells. They are sized at 122 pixels
per cell, the maximum resolution supported in BRPG, so there will be no pixelation even at the highest zoom setting. The
Fog of War Overlays may also be deployed as maps, if you wish.
artpack contains Maps 1 through 4 of their Ravenlands series of exquisitely detailed and interconnected maps.
• Map 1: The Castle Raven
• Map 2: Battleground of Old
• Map 3: River and Bridge
• Map 4: River and Caves
A 32 x 20 cell Overview Map (at a scale of 15 feet
per cell) is also included, which shows how the first
8 maps in the Ravenlands series interconnect.
The picture below shows how the Fog of War
Overlays can be used to mask things like the
interiors of buildings or caves until the adventuring
party enters and explores the area.
All the maps and Fog of War Overlays in this
artpack are designed to be displayed in BRPG at a
setting of 24 x 30 cells. They are sized at 122 pixels
per cell, the maximum resolution supported in BRPG, so there will be no pixelation even at the highest zoom setting. The
Fog of War Overlays may also be deployed as maps, if you wish.
- Only the GM needs to have this artpack installed; players do not need
to purchase or install this artpack at all. Note that BRPG v1.3d or
higher is needed to use artpacks (and because BRPG v1.3d is still in
beta, some of you may wish to hold off on purchasing this artpack
until v1.3d is out of beta).
- This artpack costs $10, and is available for ordering from the BRPG
Store page. The maps are also available in print resolution and in
various game scales at the Scrying Eye Games website, for $4.95
each.
- Disclaimer:
- Because the artpack format is brand new, there may be
undiscovered bugs that need addressing. Some users may
prefer to hold off on purchasing this artpack until all possible
kinks have been worked out.
Ravenlands Map Pack 2 is a collection of 4 maps and 4 Fog of War Overlays. Produced by Scrying Eye Games, this
artpack contains Maps 5 through 8 of their Ravenlands series of exquisitely detailed and interconnected maps.
• Map 5: Sacred Grounds
• Map 6: Town of Raventon
• Map 7: Mine and Quarry
• Map 8: The Ravenclaw's Inn
A 32 x 20 cell Overview Map (at a scale of 15 feet
per cell) is also included, which shows how the first
8 maps in the Ravenlands series interconnect.
The picture below shows how the Fog of War
Overlays can be used to mask things like the
interiors of buildings or caves until the adventuring
party enters and explores the area.
All the maps and Fog of War Overlays in this
artpack are designed to be displayed in BRPG at a
setting of 24 x 30 cells. They are sized at 122 pixels
per cell, the maximum resolution supported in BRPG, so there will be no pixelation even at the highest zoom setting. The
Fog of War Overlays may also be deployed as maps, if you wish.
artpack contains Maps 5 through 8 of their Ravenlands series of exquisitely detailed and interconnected maps.
• Map 5: Sacred Grounds
• Map 6: Town of Raventon
• Map 7: Mine and Quarry
• Map 8: The Ravenclaw's Inn
A 32 x 20 cell Overview Map (at a scale of 15 feet
per cell) is also included, which shows how the first
8 maps in the Ravenlands series interconnect.
The picture below shows how the Fog of War
Overlays can be used to mask things like the
interiors of buildings or caves until the adventuring
party enters and explores the area.
All the maps and Fog of War Overlays in this
artpack are designed to be displayed in BRPG at a
setting of 24 x 30 cells. They are sized at 122 pixels
per cell, the maximum resolution supported in BRPG, so there will be no pixelation even at the highest zoom setting. The
Fog of War Overlays may also be deployed as maps, if you wish.
- Only the GM needs to have this artpack installed; players do not need
to purchase or install this artpack at all. Note that BRPG v1.3d or
higher is needed to use artpacks (and because BRPG v1.3d is still in
beta, some of you may wish to hold off on purchasing this artpack
until v1.3d is out of beta).
- This artpack costs $10, and is available for ordering from the BRPG
Store page. The maps are also available in print resolution and in
various game scales at the Scrying Eye Games website, for $4.95
each.
- Disclaimer:
- Because the artpack format is brand new, there may be
undiscovered bugs that need addressing. Some users may
prefer to hold off on purchasing this artpack until all possible
kinks have been worked out.
RPG Virtual Tabletop
|
